404 Not Found

PATH: usr / bin

#! /usr/bin/perl -w
# -*- perl -*-
# Generated from autoreconf.in; do not edit by hand.

eval 'case $# in 0) exec /usr/bin/perl -S "$0";; *) exec /usr/bin/perl -S "$0" "$@";; esac'
    if 0;

# autoreconf - install the GNU Build System in a directory tree
# Copyright (C) 1994, 1999-2012 Free Software Foundation, Inc.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Written by David J. MacKenzie.
# Extended and rewritten in Perl by Akim Demaille.

BEGIN
{
  my $pkgdatadir = $ENV{'autom4te_perllibdir'} || '/usr/share/autoconf';
  unshift @INC, $pkgdatadir;

# Override SHELL.  On DJGPP SHELL may not be set to a shell
  # that can handle redirection and quote arguments correctly,
  # e.g.: COMMAND.COM.  For DJGPP always use the shell that configure
  # has detected.
  $ENV{'SHELL'} = '/bin/sh' if ($^O eq 'dos');
}

use Autom4te::ChannelDefs;
use Autom4te::Channels;
use Autom4te::Configure_ac;
use Autom4te::FileUtils;
use Autom4te::General;
use Autom4te::XFile;
# Do not use Cwd::chdir, since it might hang.
use Cwd 'cwd';
use strict;

## ----------- ##
## Variables.  ##
## ----------- ##

# $HELP
# -----
$help = "Usage: $0 [OPTION]... [DIRECTORY]...

Run `autoconf' (and `autoheader', `aclocal', `automake', `autopoint'
(formerly `gettextize'), and `libtoolize' where appropriate)
repeatedly to remake the GNU Build System files in specified
DIRECTORIES and their subdirectories (defaulting to `.').

By default, it only remakes those files that are older than their
sources.  If you install new versions of the GNU Build System,
you can make `autoreconf' remake all of the files by giving it the
`--force' option.

Operation modes:
  -h, --help               print this help, then exit
  -V, --version            print version number, then exit
  -v, --verbose            verbosely report processing
  -d, --debug              don't remove temporary files
  -f, --force              consider all files obsolete
  -i, --install            copy missing auxiliary files
      --no-recursive       don't rebuild sub-packages
  -s, --symlink            with -i, install symbolic links instead of copies
  -m, --make               when applicable, re-run ./configure && make
  -W, --warnings=CATEGORY  report the warnings falling in CATEGORY [syntax]

" . Autom4te::ChannelDefs::usage . "

The environment variable \`WARNINGS\' is honored.  Some subtools might
support other warning types, using \`all' is encouraged.

Library directories:
  -B, --prepend-include=DIR  prepend directory DIR to search path
  -I, --include=DIR          append directory DIR to search path

The environment variables AUTOM4TE, AUTOCONF, AUTOHEADER, AUTOMAKE,
ACLOCAL, AUTOPOINT, LIBTOOLIZE, M4, and MAKE are honored.

Report bugs to <bug-autoconf\@gnu.org>.
GNU Autoconf home page: <http://www.gnu.org/software/autoconf/>.
General help using GNU software: <http://www.gnu.org/gethelp/>.
";

# $VERSION
# --------
$version = "autoreconf (GNU Autoconf) 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+/Autoconf: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html>, <http://gnu.org/licenses/exceptions.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Written by David J. MacKenzie and Akim Demaille.
";

# Lib files.
my $autoconf   = $ENV{'AUTOCONF'}   || '/usr/bin/autoconf';
my $autoheader = $ENV{'AUTOHEADER'} || '/usr/bin/autoheader';
my $autom4te   = $ENV{'AUTOM4TE'}   || '/usr/bin/autom4te';
my $automake   = $ENV{'AUTOMAKE'}   || 'automake';
my $aclocal    = $ENV{'ACLOCAL'}    || 'aclocal';
my $libtoolize = $ENV{'LIBTOOLIZE'} || 'libtoolize';
my $autopoint  = $ENV{'AUTOPOINT'}  || 'autopoint';
my $make       = $ENV{'MAKE'}       || 'make';

# --install -- as --add-missing in other tools.
my $install = 0;
# symlink -- when --install, use symlinks instead.
my $symlink = 0;
# Does aclocal support --force?
my $aclocal_supports_force = 0;
# Does aclocal support -Wfoo?
my $aclocal_supports_warnings = 0;
# Does automake support --force-missing?
my $automake_supports_force_missing = 0;
# Does automake support -Wfoo?
my $automake_supports_warnings = 0;

my @prepend_include;
my @include;

# List of command line warning requests.
my @warning;

# Rerun `./configure && make'?
my $run_make = 0;

# Recurse into subpackages
my $recursive = 1;

## ---------- ##
## Routines.  ##
## ---------- ##

# parse_args ()
# -------------
# Process any command line arguments.
sub parse_args ()
{
  my $srcdir;

getopt ("W|warnings=s"         => \@warning,
	  'I|include=s'          => \@include,
	  'B|prepend-include=s'	 => \@prepend_include,
	  'i|install'            => \$install,
	  's|symlink'            => \$symlink,
	  'm|make'               => \$run_make,
	  'recursive!'           => \$recursive);

# Split the warnings as a list of elements instead of a list of
  # lists.
  @warning = map { split /,/ } @warning;
  parse_WARNINGS;
  parse_warnings '--warnings', @warning;

# Even if the user specified a configure.ac, trim to get the
  # directory, and look for configure.ac again.  Because (i) the code
  # is simpler, and (ii) we are still able to diagnose simultaneous
  # presence of configure.ac and configure.in.
  @ARGV = map { /configure\.(ac|in)$/ ? dirname ($_) : $_ } @ARGV;
  push @ARGV, '.' unless @ARGV;

if ($verbose && $debug)
    {
      for my $prog ($autoconf, $autoheader,
		    $automake, $aclocal,
		    $autopoint,
		    $libtoolize)
	{
	  xsystem ("$prog --version | sed 1q >&2");
	  print STDERR "\n";
	}
    }

my $aclocal_help = `$aclocal --help 2>/dev/null`;
  my $automake_help = `$automake --help 2>/dev/null`;
  $aclocal_supports_force = $aclocal_help =~ /--force/;
  $aclocal_supports_warnings = $aclocal_help =~ /--warnings/;
  $automake_supports_force_missing = $automake_help =~ /--force-missing/;
  $automake_supports_warnings = $automake_help =~ /--warnings/;

# Dispatch autoreconf's option to the tools.
  # --include;
  $aclocal    .= join (' -I ', '', map { shell_quote ($_) } @include);
  $autoconf   .= join (' --include=', '', map { shell_quote ($_) } @include);
  $autoconf   .= join (' --prepend-include=', '', map { shell_quote ($_) } @prepend_include);
  $autoheader .= join (' --include=', '', map { shell_quote ($_) } @include);
  $autoheader .= join (' --prepend-include=', '', map { shell_quote ($_) } @prepend_include);

# --install and --symlink;
  if ($install)
    {
      $automake   .= ' --add-missing';
      $automake   .= ' --copy' unless $symlink;
      $libtoolize .= ' --copy' unless $symlink;
    }
  # --force;
  if ($force)
    {
      $aclocal    .= ' --force'
	if $aclocal_supports_force;
      $autoconf   .= ' --force';
      $autoheader .= ' --force';
      $automake   .= ' --force-missing'
	if $automake_supports_force_missing;
      $autopoint  .= ' --force';
      $libtoolize .= ' --force';
    }
  else
    {
      # The implementation of --no-force is bogus in all implementations
      # of Automake up to 1.8, so we avoid it in these cases.  (Automake
      # 1.8 is the first version where aclocal supports force, hence
      # the condition.)
      $automake .= ' --no-force'
	if $aclocal_supports_force;
    }
  # --verbose --verbose or --debug;
  if ($verbose > 1 || $debug)
    {
      $autoconf   .= ' --verbose';
      $autoheader .= ' --verbose';
      $automake   .= ' --verbose';
      $aclocal    .= ' --verbose';
    }
  if ($debug)
    {
      $autoconf   .= ' --debug';
      $autoheader .= ' --debug';
      $libtoolize .= ' --debug';
    }
  # --warnings;
  if (@warning)
    {
      my $warn = ' --warnings=' . join (',', @warning);
      $autoconf   .= $warn;
      $autoheader .= $warn;
      $automake   .= $warn
	if $automake_supports_warnings;
      $aclocal    .= $warn
        if $aclocal_supports_warnings;
    }
}

# &run_aclocal ($ACLOCAL, $FLAGS)
# -------------------------------
# Update aclocal.m4 as lazily as possible, as aclocal pre-1.8 always
# overwrites aclocal.m4, hence triggers autoconf, autoheader, automake
# etc. uselessly.  aclocal 1.8+ does not need this.
sub run_aclocal ($$)
{
  my ($aclocal, $flags) = @_;

# aclocal 1.8+ does all this for free.  It can be recognized by its
  # --force support.
  if ($aclocal_supports_force)
    {
      xsystem ("$aclocal $flags");
    }
  else
    {
      xsystem ("$aclocal $flags --output=aclocal.m4t");
      # aclocal may produce no output.
      if (-f 'aclocal.m4t')
	{
	  update_file ('aclocal.m4t', 'aclocal.m4');
	  # Make sure that the local m4 files are older than
	  # aclocal.m4.
	  #
	  # Why is not always the case?  Because we already run
	  # aclocal at first (before tracing), which, for instance,
	  # can find Gettext's macros in .../share/aclocal, so we may
	  # have had the right aclocal.m4 already.  Then autopoint is
	  # run, and installs locally these M4 files.  Then
	  # autoreconf, via update_file, sees it is the _same_
	  # aclocal.m4, and doesn't change its timestamp.  But later,
	  # Automake's Makefile expresses that aclocal.m4 depends on
	  # these local files, which are newer, so it triggers aclocal
	  # again.
	  #
	  # To make sure aclocal.m4 is no older, we change the
	  # modification times of the local M4 files to be not newer
	  # than it.
	  #
	  # First, where are the local files?
	  my $aclocal_local_dir = '.';
	  if ($flags =~ /-I\s+(\S+)/)
	    {
	      $aclocal_local_dir = $1;
	    }
	  # All the local files newer than aclocal.m4 are to be
	  # made not newer than it.
	  my $aclocal_m4_mtime = mtime ('aclocal.m4');
	  for my $file (glob ("$aclocal_local_dir/*.m4"), 'acinclude.m4')
	    {
	      if ($aclocal_m4_mtime < mtime ($file))
		{
		  debug "aging $file to be not newer than aclocal.m4";
		  utime $aclocal_m4_mtime, $aclocal_m4_mtime, $file;
		}
	    }
	}
    }
}

# &autoreconf_current_directory
# -----------------------------
sub autoreconf_current_directory ()
{
  my $configure_ac = find_configure_ac;

# ---------------------- #
  # Is it using Autoconf?  #
  # ---------------------- #

my $uses_autoconf;
  my $uses_gettext;
  if (-f $configure_ac)
    {
      my $configure_ac_file = new Autom4te::XFile "< $configure_ac";
      while ($_ = $configure_ac_file->getline)
	{
	  s/#.*//;
	  s/dnl.*//;
	  $uses_autoconf = 1 if /AC_INIT/;
	  # See below for why we look for gettext here.
	  $uses_gettext = 1  if /^AM_GNU_GETTEXT_VERSION/;
	}
    }
  if (!$uses_autoconf)
    {
      verb "$configure_ac: not using Autoconf";
      return;
    }

# ------------------- #
  # Running autopoint.  #
  # ------------------- #

# Gettext is a bit of a problem: its macros are not necessarily
  # visible to aclocal, so if we start with a completely striped down
  # package (think of a fresh CVS checkout), running `aclocal' first
  # will fail: the Gettext macros are missing.
  #
  # Therefore, we can't use the traces to decide if we use Gettext or
  # not.  I guess that once Gettext move to 2.5x we will be able to,
  # but in the meanwhile forget it.
  #
  # We can only grep for AM_GNU_GETTEXT_VERSION in configure.ac.  You
  # might think this approach is naive, and indeed it is, as it
  # prevents one to embed AM_GNU_GETTEXT_VERSION in another *.m4, but
  # anyway we don't limit the generality, since... that's what
  # autopoint does.  Actually, it is even more restrictive, as it
  # greps for `^AM_GNU_GETTEXT_VERSION('.  We did this above, while
  # scanning configure.ac.
  if (!$uses_gettext)
    {
      verb "$configure_ac: not using Gettext";
    }
  elsif (!$install)
    {
      verb "$configure_ac: not running autopoint: --install not given";
    }
  else
    {
      xsystem_hint ("autopoint is needed because this package uses Gettext", "$autopoint");
    }

# ----------------- #
  # Running aclocal.  #
  # ----------------- #

# Run it first: it might discover new macros to add, e.g.,
  # AC_PROG_LIBTOOL, which we will trace later to see if Libtool is
  # used.
  #
  # Always run it.  Tracking its sources for up-to-dateness is too
  # complex and too error prone.  The best we can do is avoiding
  # nuking the time stamp.
  my $uses_aclocal = 1;

# Nevertheless, if aclocal.m4 exists and is not made by aclocal,
  # don't run aclocal.

if (-f 'aclocal.m4')
    {
      my $aclocal_m4 = new Autom4te::XFile 'aclocal.m4';
      $_ = $aclocal_m4->getline;
      $uses_aclocal = 0
	unless defined ($_) && /generated.*by aclocal/;
    }

# If there are flags for aclocal in Makefile.am, use them.
  my $aclocal_flags = '';
  if ($uses_aclocal && -f 'Makefile.am')
    {
      my $makefile = new Autom4te::XFile 'Makefile.am';
      while ($_ = $makefile->getline)
	{
	  if (/^ACLOCAL_[A-Z_]*FLAGS\s*=\s*(.*)/)
	    {
	      $aclocal_flags = $1;
	      last;
	    }
	}
    }

if (!$uses_aclocal)
    {
      verb "$configure_ac: not using aclocal";
    }
  else
    {
      # Some file systems have sub-second time stamps, and if so we may
      # run into trouble later, after we rerun autoconf and set the
      # time stamps of input files to be no greater than aclocal.m4,
      # because the time-stamp-setting operation (utime) has a
      # resolution of only 1 second.  Work around the problem by
      # ensuring that there is at least a one-second window before the
      # time stamp of aclocal.m4t in which no file time stamps can
      # fall.
      sleep 1;

run_aclocal ($aclocal, $aclocal_flags);
    }

# We might have to rerun aclocal if Libtool (or others) imports new
  # macros.
  my $rerun_aclocal = 0;

# ------------------------------- #
  # See what tools will be needed.  #
  # ------------------------------- #

# Perform a single trace reading to avoid --force forcing a rerun
  # between two --trace, that's useless.  If there is no AC_INIT, then
  # we are not interested: it looks like a Cygnus thingy.
  my $aux_dir;
  my $uses_gettext_via_traces;
  my $uses_libtool;
  my $uses_libltdl;
  my $uses_autoheader;
  my $uses_automake;
  my @subdir;
  verb "$configure_ac: tracing";
  my $traces = new Autom4te::XFile
    ("$autoconf"
     . join (' ',
	     map { ' --trace=' . $_ . ':\$n::\${::}%' }
	     # If you change this list, update the
	     # `Autoreconf-preselections' section of autom4te.in.
	     'AC_CONFIG_AUX_DIR',
	     'AC_CONFIG_HEADERS',
	     'AC_CONFIG_SUBDIRS',
	     'AC_INIT',
	     'AC_PROG_LIBTOOL',
	     'LT_INIT',
	     'LT_CONFIG_LTDL_DIR',
	     'AM_GNU_GETTEXT',
	     'AM_INIT_AUTOMAKE',
	    )
     . ' |');
  while ($_ = $traces->getline)
    {
      chomp;
      my ($macro, @args) = split (/::/);
      $aux_dir = $args[0]           if $macro eq "AC_CONFIG_AUX_DIR";
      $uses_autoconf = 1            if $macro eq "AC_INIT";
      $uses_gettext_via_traces = 1  if $macro eq "AM_GNU_GETTEXT";
      $uses_libtool = 1             if $macro eq "AC_PROG_LIBTOOL"
                                       || $macro eq "LT_INIT";
      $uses_libltdl = 1             if $macro eq "LT_CONFIG_LTDL_DIR";
      $uses_autoheader = 1          if $macro eq "AC_CONFIG_HEADERS";
      $uses_automake = 1            if $macro eq "AM_INIT_AUTOMAKE";
      push @subdir, split (' ', $args[0])
                                    if $macro eq "AC_CONFIG_SUBDIRS" && $recursive;
    }

# The subdirs are *optional*, they may not exist.
  foreach (@subdir)
    {
      if (-d)
	{
	  verb "$configure_ac: adding subdirectory $_ to autoreconf";
	  autoreconf ($_);
	}
      else
	{
	  verb "$configure_ac: subdirectory $_ not present";
	}
    }

# Gettext consistency checks...
  error "$configure_ac: AM_GNU_GETTEXT is used, but not AM_GNU_GETTEXT_VERSION"
    if $uses_gettext_via_traces && ! $uses_gettext;
  error "$configure_ac: AM_GNU_GETTEXT_VERSION is used, but not AM_GNU_GETTEXT"
    if $uses_gettext && ! $uses_gettext_via_traces;

# ---------------------------- #
  # Setting up the source tree.  #
  # ---------------------------- #

# libtoolize, automake --add-missing etc. will drop files in the
  # $AUX_DIR.  But these tools fail to install these files if the
  # directory itself does not exist, which valid: just imagine a CVS
  # repository with hand written code only (there is not even a need
  # for a Makefile.am!).

if (defined $aux_dir && ! -d $aux_dir)
    {
      verb "$configure_ac: creating directory $aux_dir";
      mkdir $aux_dir, 0755
	or error "cannot create $aux_dir: $!";
    }

# -------------------- #
  # Running libtoolize.  #
  # -------------------- #

if (!$uses_libtool)
    {
      verb "$configure_ac: not using Libtool";
    }
  elsif ($install)
    {
      if ($uses_libltdl)
	{
	  $libtoolize .= " --ltdl";
	}
      xsystem_hint ("libtoolize is needed because this package uses Libtool", $libtoolize);
      $rerun_aclocal = 1;
    }
  else
    {
      verb "$configure_ac: not running libtoolize: --install not given";
    }

# ------------------- #
  # Rerunning aclocal.  #
  # ------------------- #

# If we re-installed Libtool or Gettext, the macros might have changed.
  # Automake also needs an up-to-date aclocal.m4.
  if ($rerun_aclocal)
    {
      if (!$uses_aclocal)
	{
	  verb "$configure_ac: not using aclocal";
	}
      else
	{
	  run_aclocal ($aclocal, $aclocal_flags);
	}
    }

# ------------------ #
  # Running autoconf.  #
  # ------------------ #

# Don't try to be smarter than `autoconf', which does its own up to
  # date checks.
  #
  # We prefer running autoconf before autoheader, because (i) the
  # latter runs the former, and (ii) autoconf is stricter than
  # autoheader.  So all in all, autoconf should give better error
  # messages.
  xsystem ($autoconf);

# -------------------- #
  # Running autoheader.  #
  # -------------------- #

# We now consider that if AC_CONFIG_HEADERS is used, then autoheader
  # is used too.
  #
  # Just as for autoconf, up to date ness is performed by the tool
  # itself.
  #
  # Run it before automake, since the latter checks the presence of
  # config.h.in when it sees an AC_CONFIG_HEADERS.
  if (!$uses_autoheader)
    {
      verb "$configure_ac: not using Autoheader";
    }
  else
    {
      xsystem ($autoheader);
    }

# ------------------ #
  # Running automake.  #
  # ------------------ #

if (!$uses_automake)
    {
      verb "$configure_ac: not using Automake";
    }
  else
    {
      # We should always run automake, and let it decide whether it shall
      # update the file or not.  In fact, the effect of `$force' is already
      # included in `$automake' via `--no-force'.
      xsystem ($automake);
    }

# -------------- #
  # Running make.  #
  # -------------- #

if ($run_make)
    {
      if (!-f "config.status")
	{
	  verb "no config.status: cannot re-make";
	}
      else
	{
	  xsystem ("./config.status --recheck");
	  xsystem ("./config.status");
	  if (!-f "Makefile")
	    {
	      verb "no Makefile: cannot re-make";
	    }
	  else
	    {
	      xsystem ("$make");
	    }
	}
    }
}

# &autoreconf ($DIRECTORY)
# ------------------------
# Reconf the $DIRECTORY.
sub autoreconf ($)
{
  my ($directory) = @_;
  my $cwd = cwd;

# The format for this message is not free: taken from Emacs, itself
  # using GNU Make's format.
  verb "Entering directory `$directory'";
  chdir $directory
    or error "cannot chdir to $directory: $!";

autoreconf_current_directory;

# The format is not free: taken from Emacs, itself using GNU Make's
  # format.
  verb "Leaving directory `$directory'";
  chdir $cwd
    or error "cannot chdir to $cwd: $!";
}

## ------ ##
## Main.  ##
## ------ ##

# When debugging, it is convenient that all the related temporary
# files be at the same place.
mktmpdir ('ar');
$ENV{'TMPDIR'} = $tmp;
parse_args;

# Autoreconf all the given configure.ac.  Unless `--no-recursive' is passed,
# AC_CONFIG_SUBDIRS will be traversed in &autoreconf_current_directory.
$ENV{'AUTOM4TE'} = $autom4te;
for my $directory (@ARGV)
  {
    require_configure_ac ($directory);
    autoreconf ($directory);
  }

### Setup "GNU" style for perl-mode and cperl-mode.
## Local Variables:
## perl-indent-level: 2
## perl-continued-statement-offset: 2
## perl-continued-brace-offset: 0
## perl-brace-offset: 0
## perl-brace-imaginary-offset: 0
## perl-label-offset: -2
## cperl-indent-level: 2
## cperl-brace-offset: 0
## cperl-continued-brace-offset: 0
## cperl-label-offset: -2
## cperl-extra-newline-before-brace: t
## cperl-merge-trailing-else: nil
## cperl-continued-statement-offset: 2
## End:

[+] ..
[-] lessecho [edit]
[-] lesskey [edit]
[-] zgrep [edit]
[-] false [edit]
[-] ps2pdf14 [edit]
[-] ionice [edit]
[-] enchant-lsmod [edit]
[-] fmt [edit]
[-] vimtutor [edit]
[-] getopt [edit]
[-] flock [edit]
[-] expr [edit]
[-] date [edit]
[-] mariadb-check [edit]
[-] as [edit]
[-] slabtop [edit]
[-] pod2text [edit]
[-] join [edit]
[-] sha384sum [edit]
[-] precat [edit]
[-] pgrep [edit]
[-] mariadb-tzinfo-to-sql [edit]
[-] objdump [edit]
[-] logname [edit]
[-] addr2line [edit]
[-] bzcat [edit]
[-] chmod [edit]
[-] hunspell [edit]
[-] dropuser [edit]
[-] sh [edit]
[-] xsubpp [edit]
[-] ruby [edit]
[-] vi [edit]
[-] ex [edit]
[-] ssh-keyscan [edit]
[-] pg_dump [edit]
[-] compare [edit]
[-] bunzip2 [edit]
[-] dir [edit]
[-] mariadb [edit]
[-] flex++ [edit]
[-] pmap [edit]
[-] bzdiff [edit]
[-] nroff [edit]
[-] crontab [edit]
[-] ssh-keygen [edit]
[-] csplit [edit]
[-] utmpdump [edit]
[-] pip3 [edit]
[-] zforce [edit]
[-] troff [edit]
[-] crontab.cagefs [edit]
[-] c++ [edit]
[-] autoupdate [edit]
[-] mysqlcheck [edit]
[-] gcov-tool [edit]
[-] openssl [edit]
[-] dig [edit]
[-] cpan [edit]
[-] mariadb-dump [edit]
[-] lesspipe.sh [edit]
[-] gcc-nm [edit]
[-] b2sum [edit]
[-] easy_install-3 [edit]
[-] mariadb-binlog [edit]
[-] mysql_find_rows [edit]
[-] automake-1.16 [edit]
[-] pdf2dsc [edit]
[-] x86_64-redhat-linux-gcc-8 [edit]
[-] xxd [edit]
[-] top [edit]
[-] mariadb-plugin [edit]
[-] toe [edit]
[-] c89 [edit]
[-] wget [edit]
[-] arpaname [edit]
[-] mariadb-dumpslow [edit]
[-] sha224sum [edit]
[-] nslookup [edit]
[-] x86_64-redhat-linux-c++ [edit]
[-] tzselect [edit]
[-] ld.bfd [edit]
[-] stream [edit]
[-] prezip [edit]
[-] gpgv [edit]
[-] composite [edit]
[-] basename [edit]
[-] pathchk [edit]
[-] soelim [edit]
[-] python2 [edit]
[-] preunzip [edit]
[-] git-shell [edit]
[-] ps2pdf13 [edit]
[-] pango-list [edit]
[-] mariadb-waitpid [edit]
[-] gcov [edit]
[-] getent [edit]
[-] ghostscript [edit]
[-] sha1sum [edit]
[-] ps2pdfwr [edit]
[-] zegrep [edit]
[-] infotocap [edit]
[-] sync [edit]
[-] post-grohtml [edit]
[-] test [edit]
[-] tclsh [edit]
[-] cal [edit]
[-] unlink [edit]
[-] mysqlaccess [edit]
[-] traceroute [edit]
[-] autoreconf [edit]
[-] colcrt [edit]
[-] zsoelim [edit]
[-] ar [edit]
[-] tty [edit]
[-] enchant [edit]
[-] which [edit]
[-] msql2mysql [edit]
[-] strace [edit]
[-] mkfifo [edit]
[-] h2xs [edit]
[-] mariadb-find-rows [edit]
[-] pkill [edit]
[-] autoconf [edit]
[-] vmstat [edit]
[-] zmore [edit]
[-] renew-dummy-cert [edit]
[-] stdbuf [edit]
[-] setterm [edit]
[-] mcdiff [edit]
[-] selectorctl [edit]
[-] tic [edit]
[-] scl [edit]
[-] rename [edit]
[-] idn [edit]
[-] sha256sum [edit]
[-] more [edit]
[-] unzipsfx [edit]
[-] mysqladmin [edit]
[-] users [edit]
[-] gpgsplit [edit]
[-] g++ [edit]
[-] printenv [edit]
[-] tee [edit]
[-] gtbl [edit]
[-] pre-grohtml [edit]
[-] conjure [edit]
[-] gpg-error [edit]
[-] truncate [edit]
[-] fc-validate [edit]
[-] fgrep [edit]
[-] ssh [edit]
[-] bashbug-64 [edit]
[-] pkgconf [edit]
[-] fold [edit]
[-] fc-conflist [edit]
[-] x86_64-redhat-linux-gcc [edit]
[-] gawk [edit]
[-] setsid [edit]
[-] delv [edit]
[-] comm [edit]
[-] isosize [edit]
[-] at [edit]
[-] gunzip [edit]
[-] mysql [edit]
[-] rev [edit]
[-] login [edit]
[-] link [edit]
[-] znew [edit]
[-] gcc-ar [edit]
[-] git [edit]
[-] ifnames [edit]
[-] ssh-copy-id [edit]
[-] bzip2recover [edit]
[-] tload [edit]
[-] mysql_config [edit]
[-] fc-query [edit]
[-] dnstap-read [edit]
[-] pydoc3 [edit]
[-] echo [edit]
[-] install [edit]
[-] python3.6 [edit]
[-] pkg-config [edit]
[-] mariadb-hotcopy [edit]
[-] pyvenv-3 [edit]
[-] fc-cache-64 [edit]
[-] mail [edit]
[-] gencat [edit]
[-] expand [edit]
[-] clusterdb [edit]
[-] geoiplookup6 [edit]
[-] timeout [edit]
[-] dropdb [edit]
[-] grotty [edit]
[-] perlivp [edit]
[-] file [edit]
[-] montage [edit]
[-] mariadb-conv [edit]
[-] zipcloak [edit]
[-] gcc [edit]
[-] ipcs [edit]
[-] bison [edit]
[-] dircolors [edit]
[-] env [edit]
[-] yes [edit]
[-] geoiplookup [edit]
[-] python3 [edit]
[-] sftp [edit]
[-] nsupdate [edit]
[-] base64 [edit]
[-] cat [edit]
[-] mktemp [edit]
[-] vim [edit]
[-] replace [edit]
[-] run-with-aspell [edit]
[-] less [edit]
[-] uniq [edit]
[-] mc [edit]
[-] zipgrep [edit]
[-] tail [edit]
[-] arch [edit]
[-] zip [edit]
[-] pwd [edit]
[-] pg_dumpall [edit]
[-] convert [edit]
[-] mariadb-convert-table-format [edit]
[-] pod2html [edit]
[-] rvi [edit]
[-] atq [edit]
[-] catchsegv [edit]
[-] vimdiff [edit]
[-] split [edit]
[-] spell [edit]
[-] aclocal-1.16 [edit]
[-] animate [edit]
[-] autoheader [edit]
[-] rm [edit]
[-] zcmp [edit]
[-] mariadb-show [edit]
[-] gem [edit]
[-] diff [edit]
[-] scl_enabled [edit]
[-] tclsh8.6 [edit]
[-] vacuumdb [edit]
[-] fc-list [edit]
[-] python3.6m [edit]
[-] bzcmp [edit]
[-] xsltproc [edit]
[-] bash [edit]
[-] sdiff [edit]
[-] script [edit]
[-] perl [edit]
[-] strip [edit]
[-] fc-match [edit]
[-] wc [edit]
[-] tbl [edit]
[-] rview [edit]
[-] ssh-add [edit]
[-] view [edit]
[-] infocmp [edit]
[-] bzip2 [edit]
[-] zless [edit]
[-] unexpand [edit]
[-] perlml [edit]
[-] namei [edit]
[-] kill [edit]
[-] eps2eps [edit]
[-] recode [edit]
[-] nohup [edit]
[-] readelf [edit]
[-] realpath [edit]
[-] who [edit]
[-] pic [edit]
[-] identify [edit]
[-] zfgrep [edit]
[-] gsnd [edit]
[-] rnano [edit]
[-] c99 [edit]
[-] cmp [edit]
[-] hostid [edit]
[-] sqlite3 [edit]
[-] numfmt [edit]
[-] mcookie [edit]
[-] mariadb-embedded [edit]
[-] passwd [edit]
[-] mysqldump [edit]
[-] gsoelim [edit]
[-] mysql_waitpid [edit]
[-] nproc [edit]
[-] gpic [edit]
[-] id [edit]
[-] c++filt [edit]
[-] chgrp [edit]
[-] free [edit]
[-] groff [edit]
[-] gpg-zip [edit]
[-] objcopy [edit]
[-] watch [edit]
[-] shuf [edit]
[-] git-receive-pack [edit]
[-] sort [edit]
[-] gprof [edit]
[-] pinentry-curses [edit]
[-] autoscan [edit]
[-] captoinfo [edit]
[-] ssh-agent [edit]
[-] createdb [edit]
[-] look [edit]
[-] zipnote [edit]
[-] tset [edit]
[-] head [edit]
[-] automake [edit]
[-] stat [edit]
[-] find [edit]
[-] perlthanks [edit]
[-] nl [edit]
[-] gzip [edit]
[-] podchecker [edit]
[-] batch [edit]
[-] bzless [edit]
[-] ls [edit]
[-] du [edit]
[-] col [edit]
[-] nm [edit]
[-] gs [edit]
[-] xmlcatalog [edit]
[-] sha512sum [edit]
[-] whereis [edit]
[-] pango-view [edit]
[-] ps2ps2 [edit]
[-] hostname [edit]
[-] zipsplit [edit]
[-] mesg [edit]
[-] fc-scan [edit]
[-] pinentry [edit]
[-] cc [edit]
[-] lynx [edit]
[-] gneqn [edit]
[-] mariadb-setpermission [edit]
[-] mysqlimport [edit]
[-] skill [edit]
[-] unzip [edit]
[-] sum [edit]
[-] fc-cache [edit]
[-] true [edit]
[-] ipcrm [edit]
[-] pl2pm [edit]
[-] touch [edit]
[-] vdir [edit]
[-] fc-pattern [edit]
[-] xargs [edit]
[-] lex [edit]
[-] diff3 [edit]
[-] ptx [edit]
[-] python2.7 [edit]
[-] git-upload-archive [edit]
[-] seq [edit]
[-] cut [edit]
[-] cagefs_enter.proxied [edit]
[-] xmlwf [edit]
[-] ps2pdf12 [edit]
[-] pinky [edit]
[-] localedef [edit]
[-] mariadb-slap [edit]
[-] flex [edit]
[-] mcview [edit]
[-] instmodsh [edit]
[-] mysqlbinlog [edit]
[-] md5sum [edit]
[-] dd [edit]
[-] screen [edit]
[-] zipinfo [edit]
[-] grep [edit]
[-] pwdx [edit]
[-] nice [edit]
[-] patch [edit]
[-] printf [edit]
[-] autom4te [edit]
[-] getconf [edit]
[-] egrep [edit]
[-] [ [edit]
[-] mv [edit]
[-] mcedit [edit]
[-] ps [edit]
[-] clear [edit]
[-] mysqlshow [edit]
[-] zdiff [edit]
[-] tar [edit]
[-] ping [edit]
[-] curl [edit]
[-] column [edit]
[-] mariadb-import [edit]
[-] libtoolize [edit]
[-] ld [edit]
[-] cldetect [edit]
[-] xmllint [edit]
[-] funzip [edit]
[-] dirname [edit]
[-] GET [edit]
[-] make [edit]
[-] ps2ps [edit]
[-] eqn [edit]
[-] fc-cat [edit]
[-] tac [edit]
[-] uptime [edit]
[-] 7za [edit]
[-] base32 [edit]
[-] rmdir [edit]
[-] scalar [edit]
[-] zcat [edit]
[-] sleep [edit]
[-] pod2man [edit]
[-] taskset [edit]
[-] readlink [edit]
[-] unversioned-python [edit]
[-] podselect [edit]
[-] mogrify [edit]
[-] gtar [edit]
[-] mailx [edit]
[-] pydoc-3 [edit]
[-] size [edit]
[-] mkdir [edit]
[-] mariadb-secure-installation [edit]
[-] gpg-agent [edit]
[-] snice [edit]
[-] geqn [edit]
[-] pod2usage [edit]
[-] tsort [edit]
[-] tabs [edit]
[-] uapi [edit]
[-] sprof [edit]
[-] ps2ascii [edit]
[-] logger [edit]
[-] shred [edit]
[-] gpg [edit]
[-] freetype-config [edit]
[-] reindexdb [edit]
[-] createuser [edit]
[-] libnetcfg [edit]
[-] aclocal [edit]
[-] splain [edit]
[-] rvim [edit]
[-] renice [edit]
[-] paste [edit]
[-] my_print_defaults [edit]
[-] ps2epsi [edit]
[-] gzexe [edit]
[-] prezip-bin [edit]
[-] h2ph [edit]
[-] display [edit]
[-] hexdump [edit]
[-] git-upload-pack [edit]
[-] reset [edit]
[-] nano [edit]
[-] tr [edit]
[-] ps2pdf [edit]
[-] x86_64-redhat-linux-g++ [edit]
[-] ispell [edit]
[-] enc2xs [edit]
[-] scl_source [edit]
[-] gcov-dump [edit]
[-] df [edit]
[-] pg_restore [edit]
[-] gmake [edit]
[-] atrm [edit]
[-] gnroff [edit]
[-] make-dummy-cert [edit]
[-] perldoc [edit]
[-] neqn [edit]
[-] perlbug [edit]
[-] piconv [edit]
[-] iconv [edit]
[-] ln [edit]
[-] chrt [edit]
[-] Mail [edit]
[-] bzgrep [edit]
[-] ul [edit]
[-] grops [edit]
[-] perl5.26.3 [edit]
[-] libtool [edit]
[-] stty [edit]
[-] cpp [edit]
[-] gcc-ranlib [edit]
[-] psql [edit]
[-] import [edit]
[-] gm [edit]
[-] groups [edit]
[-] bzmore [edit]
[-] mytop [edit]
[-] mariadb-access [edit]
[-] chown [edit]
[-] strings [edit]
[-] aspell [edit]
[-] ranlib [edit]
[-] prove [edit]
[-] cp [edit]
[-] pip-3 [edit]
[-] tput [edit]
[-] cksum [edit]
[-] pr [edit]
[-] scp [edit]
[-] php [edit]
[-] pdf2ps [edit]
[-] locale [edit]
[-] host [edit]
[-] awk [edit]
[-] tmpwatch [edit]
[-] sed [edit]
[-] uname [edit]
[-] colrm [edit]
[-] m4 [edit]
[-] whoami [edit]
[-] word-list-compress [edit]
[-] ldd [edit]
[-] mariadb-admin [edit]
[-] rsync [edit]
[-] factor [edit]
[-] gtroff [edit]
[-] od [edit]